★ Residential Roofing · Central Okanagan
Kelowna & West Kelowna Residential Roof Replacement
Replace an aging or failing roof with a complete residential roofing system designed for Kelowna’s heat, UV exposure, wind, snow, and freeze-thaw cycles. We build the waterproofing, metalwork, ventilation, and installation details into the scope from the start.
Included in Every Residential System
The important details are standard—not upgrades.
Two residential roof replacements can look similar from the street while using very different protection beneath the finished material. West Country Roofing installs one complete standard with the components that manage water, wind, ventilation, and roof edges included from the beginning.
Ice & Water Shield
Self-adhered leak barrier at eaves, valleys, and vulnerable penetrations—not reserved as a paid upgrade.
Included as standardSynthetic Underlayment
A dependable secondary water-shedding layer across the residential roof deck beneath the finished roofing.
Included as standard26-Gauge Metal Package
Durable edge, transition, and water-management metal selected to support the complete roofing system.
Included as standardW-Valley Metal
Purpose-built valley metal that controls water flow and protects one of the hardest-working parts of the roof.
Included as standardProper Open-Cut Valleys
Manufacturer-recognized valley installation completed for drainage performance rather than production speed.
Included as standardGutter Apron & Drip Edge
Separate edge-metal details to direct water correctly at eaves, rakes, fascia, and gutter transitions.
Included as standardMetal Goosenecks
Durable metal exhaust components integrated with waterproofing and surrounding roofing materials.
Included as standardVentilation Assessment
Existing intake and exhaust are reviewed so the new residential roof is not installed over an unresolved attic problem.
Assessed with every systemOur Residential Replacement Process
A clear sequence from inspection to final clean-up.
Every residential replacement follows a structured process. Roof size, complexity, weather, material selection, and deck repairs can change the schedule, but the installation standard does not.
Inspection & Scope
We assess the existing roof, drainage, penetrations, attic ventilation, access, material options, and likely deck conditions before defining the residential replacement scope.
Proposal & Planning
You receive a clear system specification, material selection, standard inclusions, allowances, and project expectations before installation begins.
Property Protection
Landscaping, siding, windows, driveways, and work areas are prepared before tear-off so debris and material movement are controlled.
Full Tear-Off
Existing roofing is removed to expose the deck. We do not hide old layers or build a new residential roof over conditions that need to be seen.
Deck Review & System Installation
Damaged decking is identified and corrected as required. Waterproofing, underlayment, ventilation, metalwork, valleys, and finished roofing are then installed as one system.
Detail Review & Clean-Up
Final details are checked, debris and fasteners are removed, and the property is left ready for normal use with warranty coverage documented.
Residential workmanship backed for 15 years.
Our residential roof replacements are backed by a 15-year workmanship warranty. The warranty supports a system that is installed completely from the deck up—not a reduced package where critical protection is treated as optional.
Workmanship Beyond the Surface
A new roof is only as good as the details beneath it.
Brand-new shingles can make every replacement look finished. Long-term residential performance depends on what was inspected, corrected, waterproofed, ventilated, and integrated before the last shingle went down.
Deck condition comes first
Tear-off exposes the actual foundation of the residential roof. Deteriorated, spaced, or poorly supported decking must be addressed before the new system is installed.
Waterproofing follows risk
Eaves, valleys, penetrations, and transitions receive dedicated protection because these are the places where backed-up or redirected water can reach beneath the finished roof.
Open-cut valley workmanship
Valleys are laid out, cut, and integrated for drainage performance. We do not substitute faster production details for the valley method the system calls for.
Ventilation is part of replacement
Intake and exhaust are reviewed together. Adding new shingles without addressing trapped heat, moisture, or disconnected exhaust can shorten residential roof life.
Final details are checked
Fastening, flashing, edge metal, penetrations, ridge details, cleanup, and site condition are reviewed before the residential project is considered complete.
Residential Material Paths
Choose the material—then build the complete system.
Residential Asphalt Shingles
- Standard laminate and designer shingle options.
- Strong balance of appearance, performance, and budget.
- Suitable for most properly sloped residential roofs.
- Installed with the same complete waterproofing and metal standard.
Residential Metal & Conversions
- Standing seam, metal tile, metal shake, and metal shingles.
- Conversion paths from cedar, tar-and-gravel, or older metal where suitable.
- Deck, slope, ventilation, and transition details assessed first.
- System selection follows the building—not a one-size-fits-all package.
Material is only one part of a residential roof replacement. Deck preparation, waterproofing, underlayment, metalwork, ventilation, fastening, and workmanship determine whether the selected system can perform as intended.
Roof Replacement FAQ
Clear answers before your replacement begins.
What is included in a West Country residential roof replacement?
Our standard residential system includes ice and water shield, synthetic underlayment, 26-gauge metal details, W-valley metal where applicable, proper open-cut valleys, metal goosenecks, gutter apron, drip edge and a ventilation assessment. The exact assembly follows the roof design and selected material.
How much does a residential roof replacement cost in Kelowna?
Most homeowners pay between 10,000-20,000 for a standard shingle replacement. Use our 2026 regional pricing guide for planning ranges, then request an inspection for project-specific pricing.
How long does a residential roof replacement take?
Many straightforward asphalt-shingle projects can be completed within several working days, while large, steep, complex, metal, or conversion projects take longer. Weather and deck repairs discovered after tear-off can also change the schedule. We explain the expected sequence before work starts.
What happens if damaged roof decking is discovered?
Once the existing roof is removed, the deck is inspected. Damaged, deteriorated, or unsuitable areas must be corrected before the residential system is installed. Your proposal should explain how deck repairs are documented and priced so hidden conditions are handled clearly.
Why do your residential replacements use a six-nail pattern?
Fastening is part of wind performance. We use a six-nail installation pattern as our residential standard rather than treating enhanced fastening as an optional upgrade. Nails still have to be placed correctly within the manufacturer’s fastening zone.
Can you convert cedar shake, tar-and-gravel, or older metal roofing?
Often, yes, when the building and roof design support the proposed replacement. We assess the deck, slope, drainage, ventilation, transitions, structural considerations, and code-related work before recommending a residential conversion path.
Why can two residential roof replacement quotes be so different?
Quotes can include different waterproofing coverage, underlayment, valley metal, edge metal, ventilation, flashing, fastening patterns, deck allowances, cleanup, and warranty terms. Compare the written system scope—not only the shingle brand and final price.
What workmanship warranty covers the new residential roof?
West Country Roofing backs residential roof replacement workmanship for 15 years. Manufacturer material coverage is separate and depends on the selected product and registration requirements. We explain both forms of coverage before the project is complete.
Plan a residential replacement without stripping down the system.
Get a project-specific assessment of your existing roof, material options, ventilation, deck condition, and complete installation scope.